Do VLANs within a subnet need to have their own subnet for router on a stick?Best Practice(?): 2 publicly available subnet VLANs and inter VLAN routingSplitting up a flat network into VLANsI have two vlans on the same router that can't ping each otherVLans Cisco Packet tracerMultiple VLANs under one subnet (for traffic control)Router requirements for VLANSBest practice for connecting router to switch? (re: VLANs and multiple ports)Help with Native Vlan mismatch errorHow to turn off auto-routing between interfaces in same router ? is there any command for that?Packet-Tracer multiple IPs for a PC
Which models of the Boeing 737 are still in production?
Dragon forelimb placement
tikz: show 0 at the axis origin
Languages that we cannot (dis)prove to be Context-Free
What is the offset in a seaplane's hull?
Minkowski space
Modeling an IP Address
Why not use SQL instead of GraphQL?
Collect Fourier series terms
How does one intimidate enemies without having the capacity for violence?
Pattern match does not work in bash script
Writing rule stating superpower from different root cause is bad writing
Arthur Somervell: 1000 Exercises - Meaning of this notation
How can I prevent hyper evolved versions of regular creatures from wiping out their cousins?
Show that if two triangles built on parallel lines, with equal bases have the same perimeter only if they are congruent.
"You are your self first supporter", a more proper way to say it
Is it legal for company to use my work email to pretend I still work there?
In Japanese, what’s the difference between “Tonari ni” (となりに) and “Tsugi” (つぎ)? When would you use one over the other?
Finding angle with pure Geometry.
Test whether all array elements are factors of a number
How did the USSR manage to innovate in an environment characterized by government censorship and high bureaucracy?
Schoenfled Residua test shows proportionality hazard assumptions holds but Kaplan-Meier plots intersect
TGV timetables / schedules?
How much RAM could one put in a typical 80386 setup?
Do VLANs within a subnet need to have their own subnet for router on a stick?
Best Practice(?): 2 publicly available subnet VLANs and inter VLAN routingSplitting up a flat network into VLANsI have two vlans on the same router that can't ping each otherVLans Cisco Packet tracerMultiple VLANs under one subnet (for traffic control)Router requirements for VLANSBest practice for connecting router to switch? (re: VLANs and multiple ports)Help with Native Vlan mismatch errorHow to turn off auto-routing between interfaces in same router ? is there any command for that?Packet-Tracer multiple IPs for a PC
I have been creating a network lab in packet tracer for practice. I have 3 vlans in subnet A and I am trying to configure router on a stick at gig6/0 on the bottom left of the image. Do I need to create a subnet for each VLAN in order for the router on a stick gateway to work?
router vlan subnet trunk gateway
edited 2 hours ago
Cown
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I have been creating a network lab in packet tracer for practice. I have 3 vlans in subnet A and I am trying to configure router on a stick at gig6/0 on the bottom left of the image. Do I need to create a subnet for each VLAN in order for the router on a stick gateway to work?
router vlan subnet trunk gateway
edited 2 hours ago
Cown
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I have been creating a network lab in packet tracer for practice. I have 3 vlans in subnet A and I am trying to configure router on a stick at gig6/0 on the bottom left of the image. Do I need to create a subnet for each VLAN in order for the router on a stick gateway to work?
router vlan subnet trunk gateway
edited 2 hours ago
Cown
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I have been creating a network lab in packet tracer for practice. I have 3 vlans in subnet A and I am trying to configure router on a stick at gig6/0 on the bottom left of the image. Do I need to create a subnet for each VLAN in order for the router on a stick gateway to work?
router vlan subnet trunk gateway
router vlan subnet trunk gateway
edited 2 hours ago
Cown
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 2 hours ago
Cown
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 2 hours ago
Cown
6,90631031
edited 2 hours ago
Cown
6,90631031
edited 2 hours ago
Cown
6,90631031
6,90631031
asked 5 hours ago
Jon StinnettJon Stinnett
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
Jon StinnettJon Stinnett
61
asked 5 hours ago
Jon StinnettJon Stinnett
61
61
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jon Stinnett is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
I'm not understanding your exact problem because you don't provide enough detail but maybe this helps:
With rare exceptions, an IP subnet is mapped to a VLAN = broadcast domain = layer-2 network on a 1:1 basis.
You can run multiple IP subnets inside a single VLAN but they need a router to communicate with each other. Most often this setup doesn't make too much sense.
You can't run a single IP subnet across multiple VLANs though (without elaborate workarounds). Nodes in the same subnet expect to be able to talk to each other on a common layer-2 network = VLAN = broadcast domain.
So, your "VLANs within a subnet" can only work when you've split that subnet into sub-subnets properly and set up the router as gateway in between. A router on a stick is a router forwarding between VLAN subinterfaces on a single physical interface. Each subinterface needs to connect to one of the desired VLANs, so the link needs to be a VLAN trunk on both the switch and the router side.
answered 5 hours ago
Zac67Zac67
32.6k22163
add a comment |
Just to amplify on Zac’s answer: you have one subnet per vlan and vice versa. At the CCNA level, you can ignore the rare exceptions. The router on a stick has an (sub)interface in each subnet. Therefore all VLANs must be trunked to the router.
edited 2 hours ago
Cown
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "496"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Jon Stinnett is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58283%2fdo-vlans-within-a-subnet-need-to-have-their-own-subnet-for-router-on-a-stick%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I'm not understanding your exact problem because you don't provide enough detail but maybe this helps:
With rare exceptions, an IP subnet is mapped to a VLAN = broadcast domain = layer-2 network on a 1:1 basis.
You can run multiple IP subnets inside a single VLAN but they need a router to communicate with each other. Most often this setup doesn't make too much sense.
You can't run a single IP subnet across multiple VLANs though (without elaborate workarounds). Nodes in the same subnet expect to be able to talk to each other on a common layer-2 network = VLAN = broadcast domain.
So, your "VLANs within a subnet" can only work when you've split that subnet into sub-subnets properly and set up the router as gateway in between. A router on a stick is a router forwarding between VLAN subinterfaces on a single physical interface. Each subinterface needs to connect to one of the desired VLANs, so the link needs to be a VLAN trunk on both the switch and the router side.
answered 5 hours ago
Zac67Zac67
32.6k22163
add a comment |
I'm not understanding your exact problem because you don't provide enough detail but maybe this helps:
With rare exceptions, an IP subnet is mapped to a VLAN = broadcast domain = layer-2 network on a 1:1 basis.
You can run multiple IP subnets inside a single VLAN but they need a router to communicate with each other. Most often this setup doesn't make too much sense.
You can't run a single IP subnet across multiple VLANs though (without elaborate workarounds). Nodes in the same subnet expect to be able to talk to each other on a common layer-2 network = VLAN = broadcast domain.
So, your "VLANs within a subnet" can only work when you've split that subnet into sub-subnets properly and set up the router as gateway in between. A router on a stick is a router forwarding between VLAN subinterfaces on a single physical interface. Each subinterface needs to connect to one of the desired VLANs, so the link needs to be a VLAN trunk on both the switch and the router side.
answered 5 hours ago
Zac67Zac67
32.6k22163
add a comment |
I'm not understanding your exact problem because you don't provide enough detail but maybe this helps:
With rare exceptions, an IP subnet is mapped to a VLAN = broadcast domain = layer-2 network on a 1:1 basis.
You can run multiple IP subnets inside a single VLAN but they need a router to communicate with each other. Most often this setup doesn't make too much sense.
You can't run a single IP subnet across multiple VLANs though (without elaborate workarounds). Nodes in the same subnet expect to be able to talk to each other on a common layer-2 network = VLAN = broadcast domain.
So, your "VLANs within a subnet" can only work when you've split that subnet into sub-subnets properly and set up the router as gateway in between. A router on a stick is a router forwarding between VLAN subinterfaces on a single physical interface. Each subinterface needs to connect to one of the desired VLANs, so the link needs to be a VLAN trunk on both the switch and the router side.
answered 5 hours ago
Zac67Zac67
32.6k22163
I'm not understanding your exact problem because you don't provide enough detail but maybe this helps:
With rare exceptions, an IP subnet is mapped to a VLAN = broadcast domain = layer-2 network on a 1:1 basis.
You can run multiple IP subnets inside a single VLAN but they need a router to communicate with each other. Most often this setup doesn't make too much sense.
You can't run a single IP subnet across multiple VLANs though (without elaborate workarounds). Nodes in the same subnet expect to be able to talk to each other on a common layer-2 network = VLAN = broadcast domain.
So, your "VLANs within a subnet" can only work when you've split that subnet into sub-subnets properly and set up the router as gateway in between. A router on a stick is a router forwarding between VLAN subinterfaces on a single physical interface. Each subinterface needs to connect to one of the desired VLANs, so the link needs to be a VLAN trunk on both the switch and the router side.
answered 5 hours ago
Zac67Zac67
32.6k22163
edited 41 mins ago
answered 5 hours ago
Zac67Zac67
32.6k22163
answered 5 hours ago
Zac67Zac67
32.6k22163
answered 5 hours ago
Zac67Zac67
32.6k22163
32.6k22163
add a comment |
add a comment |
Just to amplify on Zac’s answer: you have one subnet per vlan and vice versa. At the CCNA level, you can ignore the rare exceptions. The router on a stick has an (sub)interface in each subnet. Therefore all VLANs must be trunked to the router.
edited 2 hours ago
Cown
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
add a comment |
Just to amplify on Zac’s answer: you have one subnet per vlan and vice versa. At the CCNA level, you can ignore the rare exceptions. The router on a stick has an (sub)interface in each subnet. Therefore all VLANs must be trunked to the router.
edited 2 hours ago
Cown
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
add a comment |
Just to amplify on Zac’s answer: you have one subnet per vlan and vice versa. At the CCNA level, you can ignore the rare exceptions. The router on a stick has an (sub)interface in each subnet. Therefore all VLANs must be trunked to the router.
edited 2 hours ago
Cown
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
Just to amplify on Zac’s answer: you have one subnet per vlan and vice versa. At the CCNA level, you can ignore the rare exceptions. The router on a stick has an (sub)interface in each subnet. Therefore all VLANs must be trunked to the router.
edited 2 hours ago
Cown
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
edited 2 hours ago
Cown
6,90631031
edited 2 hours ago
Cown
6,90631031
edited 2 hours ago
Cown
6,90631031
6,90631031
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
answered 4 hours ago
Ron TrunkRon Trunk
39.5k33780
39.5k33780
add a comment |
add a comment |
Jon Stinnett is a new contributor. Be nice, and check out our Code of Conduct.
Jon Stinnett is a new contributor. Be nice, and check out our Code of Conduct.
Jon Stinnett is a new contributor. Be nice, and check out our Code of Conduct.
Jon Stinnett is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Network Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58283%2fdo-vlans-within-a-subnet-need-to-have-their-own-subnet-for-router-on-a-stick%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
