What are the G forces leaving Earth orbit?If the Apollo mandate were delivered today, would the mission vehicle(s) and profile be similar?Launch Accelerations: Values, historyHas in-space refueling been done?What does burnt Aerozine-50/N2O4 smell like?What is the escape velocity of Saturn at Enceladus distance?Would the Saturn V have been able to send more mass to TLI if it had a lower earth parking orbit?In what ways would the high elliptical orbit of Apollo “E missions” simulate lunar missions?Hypersonic Inflatable Aerodynamic Decelerator entry to Mars' atmosphereHow long is the Apollo Lunar Module extraction window?Has any human had the capability of leaving the Solar System?
Different meanings of こわい
What do you call someone who asks many questions?
Why is it a bad idea to hire a hitman to eliminate most corrupt politicians?
Why is the sentence "Das ist eine Nase" correct?
How dangerous is XSS
Pact of Blade Warlock with Dancing Blade
Can compressed videos be decoded back to their uncompresed original format?
Am I breaking OOP practice with this architecture?
GFCI outlets - can they be repaired? Are they really needed at the end of a circuit?
Do creatures with a speed 0ft., fly 30ft. (hover) ever touch the ground?
Sums of two squares in arithmetic progressions
Car headlights in a world without electricity
Send out email when Apex Queueable fails and test it
Is there a hemisphere-neutral way of specifying a season?
How can I deal with my CEO asking me to hire someone with a higher salary than me, a co-founder?
Can someone clarify Hamming's notion of important problems in relation to modern academia?
My ex-girlfriend uses my Apple ID to login to her iPad, do I have to give her my Apple ID password to reset it?
How to aggregate categorical data in R?
Salesman text me from his personal phone
Do Iron Man suits sport waste management systems?
When handwriting 黄 (huáng; yellow) is it incorrect to have a disconnected 草 (cǎo; grass) radical on top?
What was Prahlada's age when his father was killed?
What is a Samsaran Word™?
What does the same-ish mean?
What are the G forces leaving Earth orbit?
If the Apollo mandate were delivered today, would the mission vehicle(s) and profile be similar?Launch Accelerations: Values, historyHas in-space refueling been done?What does burnt Aerozine-50/N2O4 smell like?What is the escape velocity of Saturn at Enceladus distance?Would the Saturn V have been able to send more mass to TLI if it had a lower earth parking orbit?In what ways would the high elliptical orbit of Apollo “E missions” simulate lunar missions?Hypersonic Inflatable Aerodynamic Decelerator entry to Mars' atmosphereHow long is the Apollo Lunar Module extraction window?Has any human had the capability of leaving the Solar System?
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
$endgroup$
add a comment |
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
$endgroup$
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago
add a comment |
$begingroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
$endgroup$
What were the G forces experienced by the Apollo astronauts during the translunar injection burn? Was there a lot of vibrations during the TLI burn?
Is there estimates of the G forces an astronaut would experience leaving Earth orbit to go to Mars?
apollo-program escape-velocity trans-lunar-injection
apollo-program escape-velocity trans-lunar-injection
asked 2 hours ago
Bob516Bob516
1,9351420
1,9351420
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago
add a comment |
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.7g, increasing as fuel mass is exhausted, and finishing up around 1.8g.
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
$endgroup$
add a comment |
$begingroup$

This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
$endgroup$
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
);
);
, "mathjax-editing");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "508"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35244%2fwhat-are-the-g-forces-leaving-earth-orbit%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.7g, increasing as fuel mass is exhausted, and finishing up around 1.8g.
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
$endgroup$
add a comment |
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.7g, increasing as fuel mass is exhausted, and finishing up around 1.8g.
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
$endgroup$
add a comment |
$begingroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.7g, increasing as fuel mass is exhausted, and finishing up around 1.8g.
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
$endgroup$
Earth departure burns can be relatively leisurely, so the acceleration tends not to be extremely high. There is some tradeoff between doing the burn over a short timeframe to maximize the Oberth effect, versus using a smaller, lighter engine and maximizing crew comfort.
At the start of the Apollo TLI, acceleration would be about 0.7g, increasing as fuel mass is exhausted, and finishing up around 1.8g.
For a Mars mission, it would depend entirely on the design of the spacecraft doing it, but it probably would be comparable.
answered 1 hour ago
Russell BorogoveRussell Borogove
88.4k3297382
88.4k3297382
add a comment |
add a comment |
$begingroup$

This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
$endgroup$
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
add a comment |
$begingroup$

This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
$endgroup$
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
add a comment |
$begingroup$

This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
$endgroup$

This image is from Quora because the picture I took from my Saturn V Haynes Manual was too big to upload. Anyway, you can see that the acceleration is by no means constant, but it peaks at just under 40 m/s^2, or around 4g. And it was a wild ride. In particular, when the first burn ended the entire structure, which had been compressed, snapped back. According to the Haynes Manual, astronaut Fred Haise said that when the first stage cut out he thought he was going through the instrument panel.
Space Shuttle, and I believe others like Soyuz, are designed to give a gentler ride, no more than 3g.
For a trip to Mars there would be two stages--getting into orbit, and getting to Mars. Getting into orbit would be like anything, probably around 3g. Getting to Mars would be a lot gentler, but depending on the technology. Like the ~6 m/s^2 of the Saturn's S-IVB stage followed by a lot of coasting--getting off the ground is a big deal, but once you're up there engines would be designed for efficiency rather than thrust. Or something like an ion engine with a barely perceptible acceleration for months at a time. There's nothing close to being ready to go yet, so it's too soon to say.
answered 46 mins ago
GregGreg
95738
95738
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
add a comment |
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
$begingroup$
That graph cuts off before the part the question is asking about -- it shows every burn prior to the Trans-Lunar Injection burn.
$endgroup$
– Mark
9 mins ago
add a comment |
Thanks for contributing an answer to Space Exploration Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35244%2fwhat-are-the-g-forces-leaving-earth-orbit%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Many years ago I heard a speech of a german shuttle astronaut. He said there were very heavy vibrations caused by the solid fuel boosters. After the separation of the boosters the cryogenic liquid fuel engines thrust felt silky smooth. So the TLI burn of the third stage of the Saturn V should be smooth too.
$endgroup$
– Uwe
1 hour ago